Dining Chairs Australia: How to Choose the Right Ones for Your Table

Dining chairs get bought last and thought about least, which is why so many dining rooms end up with chairs that are slightly too tall, slightly too wide, or slightly too uncomfortable to linger in. They are also the piece your family is physically in contact with every single day. This guide works through the decisions in the order that actually matters: fit first, then how many, then materials, then style.

The quick answer

Start with seat height and clearance, not looks. A standard dining table is around 75 cm high, and chairs with a seat height of 45 to 48 cm leave the 27 to 30 cm of leg clearance that makes a table comfortable. Allow 60 cm of table edge per person so nobody is bumping elbows, and 75 cm behind each chair so people can get out without moving the table. Choose solid timber for longevity and easy repair, or padded and upholstered seats if your family lingers at the table. Then match the chairs to the table by wood tone or by deliberate contrast, rather than hoping two similar browns will work together.

Step one: check the numbers before anything else

Almost every dining chair problem is a measurement problem, and all of them are avoidable in about five minutes.

Seat height and leg clearance

The gap between the seat and the underside of the tabletop is the number that decides whether a chair is comfortable. Aim for 27 to 30 cm. Less than that and your thighs press against the table or the apron. More and the table feels too low to eat at.

Most dining tables sit at about 75 cm, which puts the ideal seat height between 45 and 48 cm. If your table has a thick apron or a chunky rail underneath, measure to the underside of that rail rather than to the tabletop.

Width per person

Allow 60 cm of table edge per seat. You can squeeze to 55 cm for occasional use, and below that elbows start colliding. This is what actually determines how many chairs your table takes, rather than how many you can physically fit around it.

Space behind the chair

You need 75 cm from the table edge to the nearest wall or piece of furniture for someone to push back and stand up. If a walkway runs behind the chairs, make it 90 to 100 cm. This is the measurement that most often rules out a plan that looked fine on paper.

Arms, and whether the chair tucks under

Chairs with arms need the arms to clear the table apron if you want them to tuck in. If they do not, the chairs sit permanently proud of the table and the room feels smaller. Measure from the floor to the top of the arm and compare it to the height of the underside of the table.

Step two: match the chair to how you actually eat

This is where the decision tree splits, and the honest answer differs by household.

Family with young children

Wipeable is the priority. A solid timber seat, or a pad with a removable and washable cover, deals with the reality of the situation. Avoid pale fabric, deep buttoning and anything with fabric that runs down into a crevice.

Stability matters too. Children lean back on chairs regardless of what they are told, and a chair with a well-braced frame handles that better than a lightweight one.

Households that linger at the table

If dinner regularly turns into an hour of conversation, comfort earns its place. A padded seat, a shaped back that follows the spine, and a slight recline make a real difference over that time. Fabric or leather upholstery is worth it here in a way it simply is not for a household that eats in twenty minutes.

Small dining spaces

Look for chairs with a compact footprint, no arms, and a back that does not extend far past the seat. Chairs that tuck fully under the table are the difference between a usable walkway and a permanent obstacle course.

A bench on one side is worth considering in this situation. It tucks completely away, seats flexibly, and takes up no floor space when not in use. Our dining benches are sized to the same tables as the chairs.

Dining rooms used for work or homework

If the table doubles as a desk, sit-comfort over long periods matters more than it would otherwise, and so does back support. A chair that is fine for a meal can be tiring after two hours of laptop use.

Open-plan rooms where the chairs are always on show

When the dining chairs are visible from the lounge, they become part of the living room's visual weight. Lighter frames and open backs keep sightlines clear; solid, heavy chairs make the space read as more divided.

Step three: choose the materials

Solid timber seats

Hard-wearing, easy to clean, and repairable. A solid timber dining chair that loosens after ten years can be re-glued and re-clamped; a chair built from engineered board usually cannot. Oak, ash, walnut and cherry all work, and they differ mainly in tone and grain rather than in durability.

The trade is comfort over long sittings, which is what pads and upholstery solve.

Padded seats

A fabric pad on a timber frame is the middle ground and, for most Australian homes, the sensible one. You get the frame's longevity with enough cushioning for a long dinner. Check whether the pad cover can be removed for cleaning.

Fully upholstered

The most comfortable option and the one that needs the most thought about fabric. In a household with children or pets, choose a tight weave in a mid tone rather than a loose weave in a pale one.

Leather

Wipes clean, ages well, and suits households that want low-maintenance comfort. It is firmer than fabric on first sitting and softens with use.

Our current dining chair range covers all four, in solid oak, ash, walnut and cherry, with fabric and leather options across the styles. Browse the full range of dining chairs to compare.

Step four: match the chairs to your table

Two approaches work and one does not.

Matching works. Chairs from the same range as the table are designed with the same timber, finish and proportions. It is the reliable choice, and it looks deliberate.

Deliberate contrast works. Upholstered chairs against a timber table, or a darker chair against a lighter top, reads as a design decision. The contrast needs to be clear enough to look intentional.

Nearly matching does not work. Two different oaks with slightly different undertones sit badly together, because the eye reads the difference as a mistake rather than a choice. If you cannot match exactly, contrast properly instead.

If you are buying both together, our dining tables and chairs share ranges, and our guide to dining table and chair sizing covers how to size the two as a set.

Should you buy an extra chair?

Two situations make the case.

Six around a table for four. If you have an extending table, buying the extra chairs at the same time avoids the problem of a range being discontinued when you need them in three years. Chairs stack against a wall or live in another room until needed.

Replacing one later. Dining chairs take the most damage of any furniture in the house. A spare means one broken chair does not force you to replace the set.

What dining chairs cost in Australia

Across our current in-stock range, solid timber dining chairs sit between roughly AU$133 and AU$711, with most falling near AU$284. Simple timber chairs sit at the lower end, upholstered and leather chairs at the upper.

A useful way to think about the budget: a dining chair is used more hours per week than almost anything else you buy for the room, and it is the piece your guests physically experience. Spending less on the table and more on the chairs is a defensible trade in a lot of homes.

Caring for dining chairs

• Check and tighten the fixings once a year. A chair that develops a wobble and keeps being used will eventually loosen its joints properly.

• Use felt pads on the feet, particularly on timber or tile floors.

• Wipe timber with a barely damp cloth and dry it, rather than leaving moisture sitting.

• Vacuum upholstered seats and rotate them so wear spreads evenly, since the two chairs nearest the kitchen always get used most.

• Treat leather with a suitable conditioner occasionally, and keep it out of direct sunlight.

• Keep chairs away from heat pumps and fires. Timber moves when it dries out unevenly.

Frequently asked questions

What height should dining chairs be?

A seat height of 45 to 48 cm suits the standard 75 cm dining table, leaving 27 to 30 cm of leg clearance. Measure to the underside of the table apron rather than the tabletop if your table has a thick rail.

How many chairs fit around my dining table?

Allow 60 cm of table edge per person. Measure the perimeter, divide by 60, and that is your comfortable seat count regardless of how many chairs physically fit.

Do dining chairs need to match the table?

No, but they need to either match properly or contrast clearly. Chairs that almost match a table read as an accident rather than a decision.

Are upholstered dining chairs practical with children?

They can be, with the right fabric. Choose a tight weave in a mid tone, and look for removable covers on padded seats. Solid timber and leather are the easiest to keep clean.

Is a bench better than chairs?

A bench tucks completely under the table, seats flexibly, and suits narrow rooms. Chairs give better back support for long meals. Many households use a bench on one side and chairs on the other.

How much should I spend on dining chairs?

Solid timber dining chairs in our range run from about AU$133 to AU$711 depending on materials and upholstery. Since dining chairs get more daily use than most furniture in the room, they are a reasonable place to spend a little more.

Where to start

Measure your table and the space behind it first, then browse the dining chair range filtered by what fits. If you are furnishing the room from scratch, the full dining room collection keeps tables, chairs, benches and sideboards from the same ranges together.